Installation Guide: How to Use Artia Frame Strips

Step-by-Step Guide:

1. CLEAN THE WALL SURFACE. Wipe the wall with rubbing alcohol and let it dry.

2. SEPARATE THE STRIPS. Take 2 strips and press them together.

3. STICK TO THE FRAME. Peel off one side of the strip and press it firmly onto the back of the frame. Hold for 30 seconds for maximum hold.

4. POSITION AND PRESS ON WALL. Peel off the remaining liner, position your frame where you want it, and press firmly against the wall for another 30 seconds. Make sure to press all corners evenly.

5. REMOVE AND RE-PRESS (FOR STRONGER BOND). Gently pull the frame from the bottom corners to detach it, leaving the strips on the wall. Press the wall-side strips again for 30 seconds to strengthen the bond. This step helps the adhesive set better.

6. WAIT 1 HOUR. Wait at least 1 hour before reattaching the frame to let the adhesive fully set. This ensures the strips hold securely over time.

7. REATTACH THE FRAME. Align and press the frame back onto the strips on the wall. Done!